DC Power Cord - 18 ft
DC Power Cord - 18 ft $90.71
620139 This 18 DC Cord is the power cord that is used to provide power to 36 Volt Delta-Q Chargers for use on 36 Volt Electric Vehicles. This cord is typically used in on-board applications. This is the cord only, plug is not included. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.
Digital Hour Meter Kit
Digital Hour Meter Kit $164.35
614135 The E-Z-GO Digital Hour Meter Kit is manufactured for use on Gas and Electric Vehicles to measure the time the engine has been in operation.
Fuse Assembly For Powerwise II
Fuse Assembly For Powerwise II $52.75
603207 Serves as a protective device to ensure charger does not encounter power surges which could lead to damage of charger.
Hour Meter Bracket
Hour Meter Bracket $13.28
635649 This part# replaces previous part# 603721.
Insulator Sleeve for Powerwise Receptacle
Insulator Sleeve for Powerwise Receptacle $3.87
73051G06 The Insulator Sleeve is manufactured for use on E-Z-GO Electric Vehicles for the Powerwise Charger receptacle. This item is installed on the positive Radsok terminal as an electrical insulating device to separate a conductor.
Plastic Battery Tray
Plastic Battery Tray $348.44
603064 The Plastic Battery Tray provides a secure fit in the assembly of the vehicles batteries in RXV Electric Vehicles. This tray keeps the batteries stationary during vehicle use, and helps keep the batteries from being damaged due to excessive movement while the vehicle is in transit.
Powerwise Charger Plug-Male Pin-Radsock
Powerwise Charger Plug-Male Pin-Radsock $47.75
73051G14 The Powerwise Male Plug is manufactured for use on the Powerwise Charger and is a connector/contact often used in high amperage applications, as in the case of charging the vehicles batteries. This plug can be used on 36 Volt and 48 Volt Powerwise Chargers.
Powerwise Female Receptacle - Radsok
Powerwise Female Receptacle - Radsok $33.31
73051G05 The Powerwise Female Receptacle is manufactured for use on the Powerwise Charger and is a connector/contact often used in high amperage applications, as in the case of charging vehicle batteries. This cylinder socket can be used on 36 Volt and 48 Volt Powerwise Chargers.
Powerwise Charger Plug - Bottom Half
Powerwise Charger Plug - Bottom Half $41.78
73051G12 The Powerwise Charger Plug is used on 1997-current 36 Volt Powerwise Chargers. This plug is made to fit the bottom half of the Powerwise charger. Please reference Part# 73051G11 should you need the top half of the charger plug. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.
Precharge Resistor Assembly - 500 Ohm
Precharge Resistor Assembly - 500 Ohm $5.07
620430 This 500 Ohm Precharge Resistor Assembly is necessary for the installation of Part# 612711-48 Volt Solenoid Assembly. This resistor regulates the voltage and flow of current with the solenoid. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.
Reed Switch Assembly (Encapsulated)
Reed Switch Assembly (Encapsulated) $41.58
73051G28 This Reed Switch Assembly is a replacement item that is needed for use on the Powerwise Charger. Reed switches complete an electrical currentthrough being controlled by a magnetic field. This switch is enclosed in a small tube and helps to enable the operation of the vehicles charger. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.
Receptacle Holder for Total Charge Charger
Receptacle Holder for Total Charge Charger $3.76
18724G1 The Receptacle Holder is used to enclose the receptacle for the Total Charge Charger manufactured for 36 Volt Electric E-Z-GO Vehicles. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.
Reed Switch For Powerwise Charger Receptacle
Reed Switch For Powerwise Charger Receptacle $77.44
73051G07 A reed switch is a specialized switch that operates magnetically. This Reed Switch is used on 1996-2000 Powerwise Battery Charger receptacles. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.
Relay Board Assembly - Powerwise II Charger
Relay Board Assembly - Powerwise II Charger $27.36
603197 Controlled by an electric current, this relay board is used with the Powerwise II Charger. The relay board is primarily responsible for allowing a low voltage to switch to a higher voltage. This relay board includes hardware for complete assembly.
Strain Relief (Powerwise II)
Strain Relief (Powerwise II) $2.11
72970G01 NULL This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.
State of Charge Meter for 48-Volt
State of Charge Meter for 48-Volt $232.64
33636G03 The State of Charge Meter is a device that displays voltage through a number of illuminated bars lined up in a horizontal LED display. As voltage is depleted so are the illuminated bars (one by one). Its primarily used on all E-Z-GO Electric Models with a dash mounted ignition switch (excluding Precision Drive System [PDS] Vehicles). The kit comes equipped with the hardware needed for a complete installation.
Wiring Harness w/ Receptacle for Powerwise - DCS
Wiring Harness w/ Receptacle for Powerwise - DCS $356.04
73149G01 The Harness with Receptacle is used on Powerwise Chargers for E-Z-GO Electric Vehicles with DCS (Drive Control System)controllers. The harness allows an easy connection to the battery charger to properly charge and maintain the batteries. Does NOTwork with PDS (Precision Drive System).
Wiring Harness with Receptacle for 36V Powerwise Charger
Wiring Harness with Receptacle for 36V Powerwise Charger $355.72
73063G01 The E-Z-GO Harness with Receptacle is used on E-Z-GO Electric Models that use the Powerwise Charger. This harness provides the power cord connection that enables the operation of the chargerto charge the vehicle. This harnessshould be used on36 Volt vehicleswith PDS (Precision Drive System) controllers. Does NOTwork with DCS (Drive Control System).
Wiring Harness Connector for Total Charge Charger
Wiring Harness Connector for Total Charge Charger $43.52
18784G1 This Wire Harness is used on E-Z-GO Electric Marathon Models and provides the flow of power directly to the charger for the batteries to charge. This item can be used with the Total Charge III & Total Charge IV Chargers. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.
48 Volt World Charger, 10 ft Cord
48 Volt World Charger, 10 ft Cord $788.94
603093 NULL Pre-Order available on out of stock products, we will contact you about lead times.

Shipping

Fast and Reliable

Shopping

Safe and Secure

Location

Unit 8, 2 Link Drive, Yatala, QLD

Email Us

shop@ezgo.com.au
SOCIALS