Steering and Suspension

605435 This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.

601340 The A-Arm Bushing is an essential item in the vehicles front suspension. This bushing is responsible for preventing metal-to-metal contact between the a-arm ends. This bushing is also a buffer in modulating the suspension to result in a more stable and quiet ride. When this bushing becomes worn or impaired, the vehicles alignment and handling are affected, therefore replacement is necessary.

70505G01 Availability: Available Now This Rear Leaf Spring Set is used on 1994-current E-Z-GO Gas & Electric TXT, Medalist, & MPT 800 (Multi-Purpose Truck) Models, and is the type of spring commonly used for the vehicles suspension. *note: Requires 6 bushings 624030per spring.  

602085 The A-Arm Carrier Tube is an essential item installed in the vehicles front suspension between the a-arm assembly and a-arm bushing.

20098G1 This Bushing is used on leaf springs manufactured for use on E-Z-GO Gas & Electric Marathon & Industrial Models. The Bushing reduces noise and vibrations between the road and frame of the vehicle.

70049G01 The Front Leaf Spring is a flat strip of metal that is used in vehicle suspensions. The cantilever characteristic provides the leaf spring with a fixed end on one side of the leaf spring. This leaf spring is used on 1994.5-2001.5 E-Z-GO Gas & Electric Vehicles.

611724 Timely replacement of shocks is essential. Worn shocks fail to maximize Tyre contact with the road which can adversely affect the vehicles braking and handling. These shock absorbers are manufactured specifically for E-Z-GO 2Five & RXV vehicles for the rear suspension, and are the remedy for keeping your vehicle from bouncing down the road on its springs. Replaces Part # 603637

76419G01 Timely replacement of shocks is essential. Worn shocks fail to maximize Tyre contact with the road which can adversely affect braking and handling. Our shock absorbers are the remedy for keeping your vehicle from bouncing down the road on its springs. Replacement of Bushings is recommended when replacing shocks, bushings are sold separately. This shock absorber has aninternal bumper. Please refer to the bullets below for vehicle information.

602980 This Premium Steering Wheel is used on all E-Z-GO Golf & Turf Models. The 4-spoke design and cushioned wheel will add a sleek, sporty style to your vehicle. This steering wheel design is thicker and softer than the E-Z-GO steering wheels manufactured between 1988-current. These Premium Steering Wheels do not include the score card and cover.

604615 The Boot Rack Cover Kit includes the necessary components needed to install or replace the rack cover of the vehicles steering rack assembly. The boot rack cover prevents the entry of moisture, dirt and debris from the steering rack. Two boot rack covers are needed for a complete replacement on the steering rack.

20377G11 This Rear Axle is the axle shaft that transfers power from the engine to the vehicles rear wheels. This axle is an OEM (Original Equipment Manufacturer) replacement part installed on the Drivers side of the vehicle. For the corresponding Rear Axle Shaft installed on the passengers side, please reference Part# 20377G12.

70990G03 The Front Leaf Spring is a flat strip of metal that is used in vehicle suspensions. The cantilever characteristic provides the leaf spring with a fixed end on one side of the leaf spring.

12091G2 The Spindle Cap is a replacement part that fits on the top of the cotter pin on the front axle. This item is frequently used in front suspension work, and can also be used on rear axles and during brake drum assemblies for some E-Z-GO Vehicles.

618835 This Steering Rod is an OEM (Original Equipment Manufacturer) replacement rod manufactured for installation exclusively on E-Z-GO RXV and 2Five vehicles. The steering rod consists of one of two metal rods on each end of the steering rack to connect the front wheels. This item replaces Part# 603865

70745G01 The Kingpin Tube is an OEM (Original Equipment Manufacturer) replacement component installed on the E-Z-GO Vehicles referenced in the front axle and spindles. This tube can also be installed in the vehicles brake line, idler arms, tie rods, as well as the calipers and rotors.

615604 This Rear Axle Hub Assembly is an OEM (Original Equipment Manufacturer) replacement part that includes the required items needed for installation. The assembly includes a rear axle hub (604112) and 4 lug bolts (19862G2). Two assemblies are required for a complete replacement. This item replaces Part# 616430.

625748 Flanged Hex Nut M12-1.25 This part# replaces previous part# 600549.

70664G03 The Front Leaf Spring is an OEM (Original Equipment Manufacturer) replacement leaf spring that consists of a flat strip of metal that is used in vehicle suspensions. The cantilever characteristic provides the leaf spring with a fixed end on one side of the leaf spring. This part is used on 2001-current E-Z-GO TXT, 4/6-Passenger Shuttle, ST 480, Woods Boundary MAV 480, ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT 800/1000/1200, Refresher, Refresher 1200, Cushman 2/4/6-Passenger Bellhop, Cushman 280, and Cushman Commander 2200 Vehicles.This item replaces previous Part#70597G03.

620380 This Kingpin Bolt, M12-1.25 X 150, is hardware specifically designed for insertion to the kingpin tube (Item# 614034) on E-Z-GO 2Five and RXV Vehicles.

50892G1 The race bearing is used in accordance with parts such as a 4-Bolt Hub Assembly (70895G01).