Steering and Suspension

605435 This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.

601340 The A-Arm Bushing is an essential item in the vehicles front suspension. This bushing is responsible for preventing metal-to-metal contact between the a-arm ends. This bushing is also a buffer in modulating the suspension to result in a more stable and quiet ride. When this bushing becomes worn or impaired, the vehicles alignment and handling are affected, therefore replacement is necessary.

602085 The A-Arm Carrier Tube is an essential item installed in the vehicles front suspension between the a-arm assembly and a-arm bushing.

71147G01 The E-Z-GO Steering Wheel Cover is used as a replacement for an existing steering wheel cover. This steering wheel cover is manufactured to fit 1996-current E-Z-GO Gas & Electric Golf Cars & Utility Vehicles. These steering wheel covers areprimarily used on vehicles with standard and premium steering wheels and without a score card holder. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.

602980 This Premium Steering Wheel is used on all E-Z-GO Golf & Turf Models. The 4-spoke design and cushioned wheel will add a sleek, sporty style to your vehicle. This steering wheel design is thicker and softer than the E-Z-GO steering wheels manufactured between 1988-current. These Premium Steering Wheels do not include the score card and cover.

608089S The "A" Arm Assembly is a factory replacement part used on E-Z-GO Gas & Electric Vehicles in the front suspension. Also referred to as a "double-wishbone" suspension, this part helps to provide better road handling, ride quality and consistency in steering and wheel alignment.

604615 The Boot Rack Cover Kit includes the necessary components needed to install or replace the rack cover of the vehicles steering rack assembly. The boot rack cover prevents the entry of moisture, dirt and debris from the steering rack. Two boot rack covers are needed for a complete replacement on the steering rack.

618835 This Steering Rod is an OEM (Original Equipment Manufacturer) replacement rod manufactured for installation exclusively on E-Z-GO RXV and 2Five vehicles. The steering rod consists of one of two metal rods on each end of the steering rack to connect the front wheels. This item replaces Part# 603865

70961G01 The Bellows - Rack Boot is a factory manufactured part that is used with axle mounted steering systems on 2001-current E-Z-GO Gas & Electric Golf, Utility, Industrial and Shuttle Vehicles. This cover will fit on the E-Z-GO Steering Box, Part# 70964G01.

70897G02 The Threaded Tie Rod is a factory replacement part used with axle-mounted steering systems on E-Z-GO 2001-current Gas & Electric Vehicles. The tie rod attaches to the rack & pinion steering gear and the spindle. Tie rods (inner/outer) enable the vehicles Tyres to rotate left & right. Often the main reason for "loose" steering is attributed to a worn inner tie rod. This will cause the steering wheel to turn to a certain degree without coordinative movement in the wheels, therefore replacement is necessary.

70178G01 The Steering Compression Spring is used in the vehicles steering box assembly. This spring is used keep to pressure on the steering rack guide to prevent it from moving. This spring should be used on Part# 70723G02, Steering Assembly. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.

600333 This Steering Column Assembly is an OEM (Original Equipment Manufacturer) replacement part designed specifically for E-Z-GO RXV and 2Five Vehicles. This assembly includes the Steering Yoke and Steering Column assembly along with the hardware needed for a complete installation.

71948G01 The vehicles Steering Wheel is perhaps the most widely recognized part of the steering system. Its primary function is to control the steering systems movement in order to control the direction of the vehicle. This steering wheel should be installed with the following components that are sold separately: Steering Wheel Cover, Part# 71147G01, Sprocket/Shaft, Part# 71897G01, and the Steering Wheel Nut, Part# 14390G02. Inactive per Matthew - replaced by a newer standard windshield, part602979

70724G01 The Steering Gear Service Kit allows you to keep your steering system in optimum condition. This kit is manufactured for use on Steering Box Part# 70723G02 and 1994-2000 E-Z-GO Gas & Electric Vehicles. Included in the kit are: Pinion #70717G01, Ball bearing #15112G1, External retaining ring #70190G01, Adhesive bonding thread #26303G01, Steering rack #70718G01, Rack ball end #70192G01 and hardware.

70603G01 The Steering Pinion is a worm gear for the steering rack.

74605G01 The Steering Box Assembly is an OEM(Original Equipment Manufacturer) replacement part essential in the operation of the vehicles steering unit. This steering box assembly should only be installed on the E-Z-GO and Cushman vehicles noted.

15023G2 This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.

70722G02 NLA PER VERONICA ELLIS 7/19/12 This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.

608117 The Column Sub-Assembly is an OEM (Original Equipment Manufacturer) part for the vehicles Steering Rack (Part# 618329 - RXV & 609371 - 2Five) that is necessary in completing the steering column assembly. For the complete steering assembly which includes the steering yoke, please reference Part# 600333.

70964G01 The Steering Box Assembly is used with axle-mounted steering systems manufactured from 2001-current for E-Z-GO TXT and MPT (Multi-Purpose Truck) 800/1000 Vehicles only. Benefits/Product Featurse: OEM manufactured for fit and quality 4-Hole steering box complete with internal gears Tie rod & end that attaches to the passengers side spindle assembly Vehicle Fit: Used on 2001-Current E-Z-GO Gas and Electric TXT and MPT 800/1000 Vehicles Will NOT fit the RXV, MPT 1000/1200, Workhorse ST-350 or ST-480 trucks, the Clays Car, the Cushman Commander 4800, or any Golf Cars or Small Utility Trucks made prior to 2001