Steering and Suspension

70718G01 The E-Z-GO Steering Rack can be used on 1994-current E-Z-GO Gas & Electric Golf Cars and Utility Vehicles with the frame-mounted steering column. Note: Does not fit vehicles with axle-mounted steering boxes or RXVs.

26822G01 The Differential Gasket Case is an OEM(Original Equipment Manufacturer) replacementseal required in the rear axle.

602512 The Front Axle maintains the vehicles wheel position relative to each wheel and the vehicles body.This front axle is a factory replacement for 2004-2005 MPT 800, 2009-2013 ST Sport II, 2012-Current Gas Terrain 250/500/100, 2012 - Current Electric Terrain 250, and 2012-Current Gas and Electric Express S6 vehicles.

70965G01 The Steering Rack Cover Assembly with Bearing is an OEM(Original Equipment Manufacturer)replacement housing used in the installation of the Steering Box Assembly.

604494 RearLeaf Spring is a flat strip of tapered metal that is used in vehicle suspensions. Heavy Duty leaf springs are ideally used as a standard component on 4-Passenger golf vehicles, and are recommended for use on vehicles with a rear seat kit, lift kit, off-road use, or when adding any weight to the vehicle including, cargo beds and tool boxes.

608811 The End Cap Plug is used to plug any holes in the structural assemblyof the differential, also referred to as afreeze plug.

18456G1 This Grease Fitting is an OEM (Original Equipment Manufacturer) replacement component installed in the vehicles steering unit. The grease fitting acts as a cushion between two corresponding parts, and seals in lubrication to allow these parts to move freely and without added friction to reduce extensive wear over time. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.

27205G01 An important part of the steering mechanism, the tie rod end is linkage that connects the inner and outer tie rods to the steering knuckle. To prolong the life of the tie rod end, it is wise to grease the tie rod during oil and filter changes. Dry tie rods will quickly wear and can come apart when worn, thus preventing the steering ability of your vehicle. Two tie rod ends are needed per vehicle. This tie rod is used on the Drivers side of vehicle. The tie rod for the Passengers side of vehicle is Part# 27205G02.

604961 The Shackle Plate is used to attach and secure the leaf spring to the vehicles frame. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.

601246 The Strut Assembly is a part of the vehicles front suspension assembly. This strut fits into the shock absorber to aid in the smooth handling and ride quality of RXV and 2Five Vehicles. This is an OEM (Original Equipment Manufacturer) replacement component installed on the vehiclesdriver side.

70902G01 This Tie Rod End isinstalled on the Drivers sideof the 2001-current E-Z-GO Gas & Electricvehicles referencedwith axle-mounted steering systems. For the corresponding tie rod end installed on the Passengers side, please reference Part# 70902G02. Please Note: Tie rod ends are internally threaded (female) and tie rods are externally threaded (male).

605721 This Heavy-Duty Leaf Spring is used on E-Z-GO Gas golf and utility vehicles as a standard component for 4-Passenger golf cars. This part is recommended for use on cars and utility vehicles with a rear seat kit, on vehicles driven for off-road use, have a cargo box, or vehicles that require a lift kit.

601920

70223G01 This Steering Column Gasket is an OEM (Original Equipment Manufacturer) replacement gasket manufactured for installation on the E-Z-GO Gas & Electric vehicles referenced. The steering column gasket protects the steering components from dirt, debris, or water and should be installed on steering columns with 3 mounting holes. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.

70751G01

19154G1 NULL

603024 The Strut Assembly is a part of the vehicles front suspension assembly. This strut fits into the shock absorber to aid in the smooth handling and ride quality of RXV and 2Five Vehicles. This is an OEM (Original Equipment Manufacturer) replacement component installed on the vehicles passengers side.

73120G07 The Advance Motor Bearing is used on E-Z-GO Vehicles with the Advance brand motor, and is compatible with Club Car Electric Vehicles with the Fuji axle. The two rubber seals will protect the bearing from dust or possible contamination, and will keep the lubrication inside the seal. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.

614756 The Limited Slip Differential Kit provides differentials with sound limited slip functionality. Should a Tyre lose traction, this differential allows the motor to supply power to the other Tyre. This kit is ideal for vehicle usage over intense terrain such as mud conditions, off-road, steep grades or wet surfaces. This kit should be used on vehicles with the following axles: part# 73500G01and Part# 74612G01. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.

26814G01 The Snap Ring is a factory replacement for the axle bearing used in rear/Dana axle installations. This item fits on the end of the axle shaft. This snap ring prevents the bearing from moving and should only be used on vehicles with 4-Cycle transaxles, and a 295cc or 350cc Fuji-Robin Engine. This is a Clearance Item, If sold out - Contact us for price and availability. No further discounting applies to Clearance Items.